Accu-Chek Nano Owner's Booklet page 68

5. Locate the infrared (IR) window on the top of the meter.
6. Locate the IR window on the infrared cable.
7. Place the meter on a flat surface. Point the two IR windows toward each other.
They should be 1–4 inches apart.
8. Do not move the infrared cable or meter during the data transfer.
9. Follow the prompts on the software.
10. The software program may shut off the meter automatically when the data
transfer is complete. Should this occur, follow the prompts on the display.
66
nOTE
• If the data did not transfer successfully, try again. If you still have problems, contact the ACCU‑CHEK
Customer Care Service Center at 1‑800‑858‑8072.
• To make the most of the transfer feature, you must set the time and date in the meter correctly.
infrared (ir) Window