Accu-Chek Nano Owner's Booklet page 32

30
1. To make sure the display is
working properly, turn off the
meter, then press and hold
to see the complete display. All
segments should be clear and
look exactly like the picture. If
any segments are missing from
the display, there may be a
problem with the meter.
Contact the ACCU‑CHEK
Customer Care Service Center
at 1‑800‑858‑8072.
2. Wash your hands with warm
soapy water and dry
thoroughly. Dirty or wet hands
could affect results.
3. Prepare the lancing device.
4. Check the Use By date on the
test strip container. Do not use
test strips past the Use By
date.