Martin MAC 250 Krypton User Manual page 18

S T A N D A R D R O T A T I N G G O B O C O N F I G U R A T I O N
The MAC 250 Krypton/Entour provides 7 gobos as shown below.
1
2
3
R E P L A C I N G A G O B O
Danger! Intense heat. Avoid contact by persons and materials. The exterior of the fixture can get
very hot - up to 120° C (248° F). Disconnect the fixture from AC power and allow it to cool
for at least 45 minutes before handling.
Do not removing covers while the fixture is powered on as this exposes dangerous live
electrical circuits, hot surfaces, and a lamp under high pressure.
1 Disconnect the fixture from AC power and allow it to cool.
2 Remove the top cover of the fixture head using a flathead screwdriver to loosen the four quarter-turn
screws. The top and bottom cover look the same, but the top cover is found by checking if the text on the
back of the head is oriented correctly (top) or not (bottom) as illustrated here.
3 Turn the gobo wheel to access the desired position.
18
4
Figure 3: MAC 250
MAC 250 Krypton/Entour
Position
1
7
2
3
4
5
6
7
6
Table 2: Rotating gobos
5
Gobo
Eclipse
Fat bar
Fan
Happy Yins
Twisted triangle
Splash
Aflobet