Table of Contents
Advertisement
using the digital receiver, you should keep it plugged into
a wall socket to be in standby mode so that it can run timer
events at any time.
1.2.1 Front panel
The front panel of the digital receiver has buttons to control
the digital receiver, specific lights and a display to indicate its
status. The following indicates what they mean.
Front display shows the current time in standby mode, and
MENU button displays the main menu. It is also used to return
OK
CHANNEL
VOLUME
button switches the digital receiver between standby mode
and active mode. This button has a tiny light on its left
edge, which lights up in red in standby mode if the Standby
Mode option is set to Passive. See
displays the current service in active mode.
to the previous menu from a submenu.
Hold the MENU/OK button down two seconds to make
it function as the menu button.
button displays the services list. See
tails. It is also used to select a menu item.
?
=
,
buttons switch to the previous or next ser-
vice.
>
@
,
buttons decrease or increase the volume.
1.2 Controlling the digital receiver 3
§4.12
for more details.
§5.2.1
for more de-
1
Advertisement
Table of Contents
