Table 2.2: Physical specifications
Size
Weight
Operating temperature
Storage relative humidity
The digital receiver has two covers are fitted slightly above its
top and bottom surface for cooling. If they come off, fix them
following the instructions below.
2.3 Rear panel connections
The SRP-2110 has a wide range of connections on the back.
2.3 Rear panel connections 13
340× 82× 258 mm
3.8 kg
◦
0 to 45
C
5 to 90 %
1. Put the hook of the front cover
in the center of the back side as
shown in the left figure.
2. Push down the outer face of
each strut until it is firmly
fixed.
3. Turn upside down the digital
receiver.
4. Do it with the bottom cover in
the same way.
2