Searching For Services - Topfield SRP-2110 User Manual

28 Service Search

3.1.4 Searching for services

Searching every service of a satellite
There are in general four service search methods:
• searching every service of a satellite,
• searching every service of a transponder,
• searching single service of a transponder,
• searching every service of a SMATV (Satellite Master An-
tenna Television) system.
To search every service of a satellite, take the following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Auto.
3. If you set the Network Search option to On, the digital
receiver will check up the up-to-date channel informa-
tion while searching services, but it takes a rather longer
time.
With the Auto mode, the digital receiver tries to search every
service, relying on the transponder data which is stored at the
time of manufacture. It thus may happen to fail to search all ac-
tually available services since services are more often than not
launched, discontinued, or removed into another transponder.
To perform a service search, se-
lect the Installation > Searching
menu. You should see a screen
like the left figure.