Rear Panel Connections - Topfield CRC-1400 User Reference

Table 2.1: Power specification
Input voltage
Power consumption
Table 2.2: Physical specifications
Size
Weight
Operating temperature
Storage relative humidity

2.3 Rear panel connections

The CRC-1400 has a wide range of connections on the back.
• The wall socket should be near the equipment. Do not
run an extension lead to the unit.
• The mains plug shall remain readily operable so that it
can be removed easily to disconnect the power.
• When placed in a cabinet, make sure there is a minimum
space of 10 centimetres around it. For the physical spec-
ification of the digital receiver, refer to Table 2.2.
• Protect the power cord from being walked on or pinched.
If the cord is damaged, do not use the digital receiver and
get the cord replaced.
• Refer all servicing to a qualified service technician.
• To maintain proper ventilation, always leave sufficient
space around the digital receiver.
90 to 250 V AC, 50/60 Hz
30 W at maximum in active
Under 1 W in passive standby
2.3 Rear panel connections 9
340× 60× 265 mm
2.6 ~ 3.1 kg (may vary due to HDD kind)
0 to 39
◦
C
5 to 90 %