Removal Of V1-Board And V2-Board; Removal Of Plasma Panel - Panasonic TH-37PH10UK Service Manual

6.17. Removal of V1-Board and V2-
Board
1. Remove the Escutcheon.
(Refer to Removal of Escutcheon)
2. Remove 4 screws and then remove the Fixed Angle.
3. Remove 1 screw (L).
4. Disconnect the connector (V2) and then remove V1-Board.
5. Remove the operation button from V2-Board.
6. Disconnect the connector (V15) and then remove V2-
Board.

6.18. Removal of Plasma Panel

1. Remove 6 screws and then remove the Stand Block (L, R).
2. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
3. Remove the Flexible Cable from the connector (DS1).
4. Remove 4 screws and then remove the Slot Block.
5. Disconnect the connector (DN6).
6. Remove 4 screws and then remove DN-Board.
7. Remove 4 screws and then remove the Fixed Plate.
17
TH-37PH10UK / TH-42PH10UK