Disassembly (37 Inch); Removal Of Rear Cover; Removal Of Hu-Board; Removal Of Ha-Board - Panasonic TH-37PH10UK Service Manual

6 Disassembly (37 inch)

· To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
· and marks indicate screw positions.
6.1.

Removal of Rear Cover

1. Remove screws (×12
remove the Rear Cover.
6.2.

Removal of HU-Board

1. Remove 4 screws (A) and then remove the HU Terminal
Block.
2. Remove 4 screws (B).
3. Remove 3 screws (C) and then remove HU-Board.
, ×7 , ×4 , ×5 ) and then
6.3.

Removal of HA-Board

1. Remove 4 screws (D) and then remove the HA Terminal
Block.
2. Remove 4 screws (E).
3. Remove 3 screws (F) and then remove HA-Board.
6.4.

Removal of Slot Block

1. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
2. Remove the Flexible Cable from the connector (DS1).
3. Remove 4 screws and then remove the Slot Block.
11
TH-37PH10UK / TH-42PH10UK