Removal Of The Fan; Removal Of The V1-Board, V2-Board And The Operation Button - Panasonic TH-42PH9WK Service Manual

TH-42PH9WK / TH-42PH9WS

6.16. Removal of the Fan

1. Disconnect the Fan Relay Couplers.
2. Remove the each 3 screws and then remove the 3 Fan
Blocks.
3. Remove the each 4 screws (G) and then remove the Fans.
4. Reassemble the Fans in reverse order.
5. Stick the Cushion (Fan) around the Fan.
Note:
The Cushion (Fan) are unsuitable to reuse.
Please use a new one at the time of Fan exchange.
6.17. Removal of the V1-Board, V2-
Board and the Operation
Button
1. Remove the S1-Board Block.
(Reference to Removal of the S1-Board)
2. Disconnect the couplers(J2, J15).
3. Remove the 2 screws of the Escutcheon.
4. Pull the bottom of the Plasma Panel forward (arrow1).
5. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
6. Remove the 5 screws and then remove the Fixed Angle(C).
14