Panasonic TH-37PH10UK Service Manual page 19

23. Remove the Flexible Cables from the connector (C10, C11,
C20, C21).
24. Remove 6 screws of the Escutcheon.
25. Remove the 12 Spacers and Spacer Rings from the Plasma
Panel.
Caution:
· Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel,
and install Spacer and Spacer Ring in an original
installation place after exchanging the Plasma
Panel.
26. Lift up the bottom of the Plasma Panel in the direction of the
arrow 1 and pull the Plasma Panel in the direction of the
arrow 2 and then remove the Plasma Panel.
19
TH-37PH10UK / TH-42PH10UK