Remote Controller - Daikin BA-Series Service Manual

SiBE05-722ED

1. Remote Controller

Signal transmitter
Receiver
• To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
• The maximum distance for
communication is approximately 7 m.
1
HOME LEAVE button
• Press this button to start HOME
LEAVE operation.
The HOME LEAVE lamp lights up.
HOME LEAVE lamp
• Press the button again to cancel
HOME LEAVE operation.
Reference Refer to the following pages for detail.
★1 HOME LEAVE operation
★2 POWERFUL operation
Note: Refer to the operation manual of applicable model for detail. You can download operation
manuals from DISTRIBUTOR'S PAGE:
DISTRIBUTOR'S PAGE → Product Information → Operation/Installation Manual
(URL: http://global.daikin.com/Daikin/global/Distributors_admin/user_mng/login.php)
Remote Controller
HEAT PUMP model
COOLING ONLY model
P.34
P.35
Display (LCD)
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
TEMPERATURE
adjustment buttons
• Changes the temperature setting.
: AUTO
: DRY
: COOL
: HEAT
: FAN
ON/OFF button
• Press this button once to start
operation.
Press once again to stop it.
POWERFUL
• Starts POWERFUL operation
ARC433B67
ARC433B68
Remote Controller
18 ~ 30 ˚C
Not available
18 ~ 32 ˚C
10 ~ 30 ˚C
Not available
2
button
(R19659)
54