Maintenance - GreenWorks 1500 PSI Operator's Manual

MAINTENANCE

W A R N I N G
When servicing, use only identical replacement parts.Use of any other parts may create a hazard
or cause product damage..
W A R N I N G
Always wear eye protection marked to comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes, resulting in possible serious injury.
W A R N I N G
Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to
stop, and disconnect spark plug wire and move it away from spark plug.Failure to follow these
instructions can result in serious personal injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
W A R N I N G
Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may
result in serious personal injury.
Only the parts shown on the parts list are intended to be repaired or replaced by the customer.
All other parts should be replaced at an authorized service center.
NOZZLE MAINTENANCE
Excessive pump pressure (a pulsing sensation felt while squeezing the trigger) may be the result
of a clogged or dirty nozzle.
(See Figure 14.)
21
Fig. 14