Important Safety Instructions - GreenWorks 1500 PSI Operator's Manual

IMPORTANT SAFETY INSTRUCTIONS

W A R N I N G
Read and understand all instructions. Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious personal injury.
W A R N I N G
When using this product basic precautions should always be followed, including the following
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
• To reduce the risk of injury, close supervision is necessary when a product is used near
children.
• Be thoroughly familiar with controls. Know how to stop the product and release pressure
quickly.
• Stay alert and exercise control. Watch what you are doing and use common sense. Do not
operate product when you are tired. Do not rush.
• Do not operate the product while under the influence of drugs, alcohol, or any
medication.
• Keep the area of operation clear of all people,particularly small children, and pets.
• Don't overreach or stand on unstable support. Keep proper footing and balance at all times.
• Follow the maintenance instructions specified in this manual.
• This product is provided with a ground fault circuit interrupter built into the power cord
plug. If replacement of the plug or cord is needed, use only identical replacement parts.
W A R N I N G
Risk of injection or injury – Do not direct discharge stream at people or animals.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a ground fault circuit interrupter (GFCI) built into the plug
of the power supply cord. This device provides additional protection from the risk of electric
shock. Should replacement of the plug or cord become necessary, use only identical replacement
parts that include GFCI protection.
SERVICING OF A DOUBLE-INSULATED APPLIANCE
In a double-insulated product, two systems of insulation are provided instead of grounding.No
grounding means is provided on a double-insulated product, nor should a means for grounding
be added to the product. Servicing a doubleinsulated product requires extreme care and
knowledge of the system, and should be done only by qualified service personnel. Replacement
parts for a double insulated product must be identical to the parts they replace. A doubleinsulated
product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED."The
symbol may also be marked on the product.
3