Table of Contents
Advertisement
ELECTRICAL
W A R N I N G
Keep the extension cord clear of the working area. Position the cord so that it will not get caught
on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so
can result in serious personal injury.
W A R N I N G
Check extension cords before each use. If damaged replace immediately. Never use the product
with a damaged cord since touching the damaged area could cause electrical shock resulting in
serious injury.
GROUND FAULT CIRCUIT INTERRUPTER
This unit is equipped with a Ground Fault Circuit Interrupter (GFCI), which guards against the
hazards of ground fault currents. An example of ground fault current is the current that would
flow through a person who is using an appliance with faulty insulation and, at the same time, is in
contact with an electrical ground such as a plumbing fixture, wet floor, or earth.
GFCI plugs do not protect against short circuits, overloads, or shocks.
NOTE: To ensure readiness for use, press the reset button each time you connect the pressure washer to the
power supply
**Ampere rating (on product data plate)
0-2.0
Cord Length
25'
50'
100'
**Used on 12 gauge - 20 amp circuit.
NOTE: AWG = American Wire Gauge
2.1-3.4
3.5-5.0
16
16
16
16
16
16
5.1-7.0
Wire Size (A.W.G.)
16
16
14
10
7.1-12.0
12.1-16.0
16
14 14
14
14 12
12
10 ---
Hide quick links:
Advertisement
Table of Contents
