Mitsubishi Electric Mr.SLIM PC-2GAKD Technical & Service Manual page 45

[Function selection flowchart]
Setting language (English)
Item 1
Change
Language
Function
selection
E
Mode
selection
Display
mode setting
Normal display
(Display when the air conditioner is not running)
E
Hold down the button and press the
Remote controller function selection mode
Item 2
G
English
G
Germany
Spanish
Russian
E
G
Italian
Chinese
French
Japanese
G
G
E
G
G
G
G
G
G
E
G
G
G
G
G
G
G
Hold down the
D
button for 2 seconds.
Dot display
D
Item 3
D
Operation lock setting is not used.
OFF
(Initial setting value)
D
Operation lock setting is except On/Off button.
no1
D
Operation lock setting is all buttons.
no2
D
The automatic mode is displayed when the operation
ON
mode is selected. (Initial setting value)
D
D
The automatic mode is not displayed when the operation mode
OFF
is selected.
D
The temperature range limit is not active. (Initial setting value)
OFF
D
The temperature range can be changed on cooling/dry mode.
D
The temperature range can be changed on heating mode.
The temperature range can be changed on automatic mode.
Automatic filter elevation panel up/down operation mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
Optional Parts (Panel) for details on operation.
Fixed air flow direction mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
indoor unit for details on operation.
D
The remote controller will be the main controller. (Initial setting value)
D
D
The remote controller will be the sub controller.
D
The clock function can be used. (Initial setting value)
ON
D
D
OFF The clock function cannot be used.
D
Weekly timer can be used. (Initial setting value)
D
Auto off timer can be used.
D
Simple timer can be used.
Timer mode cannot be used.
D
The set contact numbers are not displayed in case of error.
OFF
(Initial setting value)
D
D
CALL- The set contact numbers are displayed in case of error.
D
The temperature unit ˚C is used. (Initial setting value)
:
D
D
°F
The temperature unit ˚F is used.
D
ON Room air temperature is displayed. (Initial setting value)
D
D
OFF Room air temperature is not displayed.
D
ON One of "Automatic cooling" and "Automatic heating" is displayed
under the automatic mode is running. (Initial setting value)
D
D
Only "Automatic" is displayed under the automatic mode.
OFF
45
E D
button and press the button for 2 seconds.
E
Press the operation mode button.
G
Press theTIMER MENU button.
D
Press theTIMER ON/OFF button.
F
TEMP. ON/OFF
E
MENU ON/OFF
BACK MONITOR/SET DAY
CHECK
PAR-21MAA CLOCK OPERATION
CLEAR
G
C D
I
A
FILTER
TEST
B
H