Flexible Antenna; Beltclip; Listening Safely; Connecting The (Optional) Remote Cable - Uniden UBC3300XLT Owner's Manual

Flexible Antenna

Attach the flexible antenna to the
antenna connector.

Beltclip

The beltclip is designed to fit snugly on
the back of the scanner.
Line up the four arms on the beltclip with
the four tabs on the scanner and slide the
beltclip into place, as shown on the right.

Listening Safely

To protect your hearing, follow these guidelines when you use
an earphone or headphones.
• Do not listen at extremely high volume levels. Extended
high volume listening can lead to permanent hearing loss.
• Set the VOLUME to the lowest setting before you begin
listening. After you begin listening, adjust the VOLUME to a
comfortable level.
• Once you set the VOLUME, do not increase it. Over time,
your ears adapt to the volume level, so a volume level that
does not cause discomfort might still damage your hearing.

Connecting the (Optional) REMOTE Cable

You can transfer the programmed channels, talk group ID's,
etc. to and from another UBC3300XLT scanner using a
remote cable. See "Clone Mode" on page 73. You can also
upload or download the programmed data to or from a PC.
See "PC Control mode" on page 72.
14