Hyundai Grand i10 Owner's Manual page 333

BA RHD 9_PB eng 7.qxd 8/27/2013 5:01 PM Page 81
License plate light bulb replacement
1. Using a flat-blade screwdriver, remove
the light assembly from the body of the
vehicle by prying the housing and
pulling the assembly out.
2. Separate the socket and the lens part
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the lens part.
3. Remove the bulb by pulling it straight
out.
4. Insert a new bulb in the socket.
5. Reassemble the socket and the hous-
ing part.
6. Reinstall the light assembly to the
body of the vehicle.
■ Room lamp
OBA073022
■ Luggage room lamp
Interior light bulb replacement
1. Using a flat-blade screwdriver, gently
pry the lens from the interior light
housing.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior
light housing notches and snap the
lens into place.
CAUTION
Be careful not to dirty or damage lens,
lens tab, and plastic housings.
OTD079037/OBA073023
Maintenance
9 81