Hyundai Grand i10 Owner's Manual page 314

BA RHD 9_PB eng 7.qxd 8/27/2013 5:00 PM Page 62
Maintenance
■ Diesel engine only
Engine compartment panel fuse
replacement
1. Turn the ignition switch and all other
switches off.
2. Remove the fuse box cover by press-
ing the tap and pulling the cover up.
9 62
3. Remove and check the suspected
fuse; replace it if it is blown. To remove
or insert the fuse, use the fuse puller in
the engine compartment fuse panel.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, we recommend that you
consult an authorized HYUNDAI dealer.
CAUTION
OBA073014
After checking the fuse box in the
engine compartment, securely install
the fuse box cover. If not, electrical
failures may occur from water leaking
in.
OBA073042R
Main fuse (multi fuse)
If the main fuse is blown, it must be
removed as follows:
1. Disconnect the negative battery cable.
2. Remove the nuts shown in the picture
above.
3. Replace the fuse with a new one of the
same rating.
4. Reinstall in the reverse order of
removal.
✽ NOTICE
If the main fuse is blown, we recom-
mend that you consult an authorized
HYUNDAI dealer.
OBA073015