Turn Signals And Lane Change Signals; Front Fog Light - Hyundai Grand i10 Owner's Manual

Operation maintenance specifications
Hide thumbs Also See for Grand i10:
Table of Contents

Advertisement

BA RHD 6a_PB eng 4-63.qxd 8/26/2013 4:09 PM Page 51
Turn signals and lane change
signals
To signal a turn, push down on the lever
for a left turn or up for a right turn in posi-
tion (A). To signal a lane change, move
the turn signal lever slightly and hold it in
position (B). The lever will return to the
OFF position when released or when the
turn is completed.
If an indicator stays on and does not
flash or if it flashes abnormally, one of the
turn signal bulbs may be burned out and
will require replacement.
One-touch lane change function
(if equipped)
To activate an one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3 times.
✽ NOTICE
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or have
a poor electrical connection in the circuit.
OBA043217IN
Features of your vehicle
OBA043216IN
Front fog light (if equipped)
Fog lights are used to provide improved
visibility and avoid accidents when visibil-
ity is poor due to fog, rain or snow etc.
The fog lights will turn on when fog light
switch (1) is turned to the ON position
after the parking light is turned on.
To turn off the fog lights, turn the switch
to the OFF position.
6 51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xcent

Table of Contents