Seagull cassutt 3M Racer Assembly Manual page 19

4) Thread one clevis and M3 lock nut on to
each rudder and elevator control rod. Thread
the horns on until they are flush with the ends
of the control rods.
5) Elevator and rudder pushrods assembly
as pictures below.
Cable Steering
www.seagullmodels.com
Elevator pushrod.
Elevator pushrod.
Cable Steering
MOUNTING THE TALI WHEEL.
Required Parts
• Fuselage assembly
•
Tail wheel assembly
•
M3 Washer(2)
• M3x30mm socket head screw(2)
•
M3x25mm machine screw(2)
Required Tools and Adhesives
• Phillips screwdrive
• 30-minute epoxy
•
Drill
1) Locate the items for this section of the
manual.
3x25 mm.
Aluminum tail
landing gear.
3 x 30mm.
19