Landing Gear.
C/A glue.
7) Tighten the setcrews using a hex
wrench to secure the collars on the axle over
the flat spot to retain the wheel as shown.
Locker glue.
Drill a hole.
www.seagullmodels.com
wheel Pant.
C/A glue.
Repeat steps as above to attach
remaining wheel pants to the landing gear.
INSTALLING THE MAIN LANDING GEAR
TO FUSELAGE.
Required Parts
•
Fuselage assembly
•
M4 Washer (4)
•
M4x20mm socket head screw(4)
Required Tools and Adhesives
•
Phillips screwdrive
•
Thread locker glue
8) The blind nuts for securing the landing
gear are already mounted inside the fuselage.
9) Using the hardware provided, mount
the main landing gear to the fuselage.
11