Chapter 6. Maintenance Service And Trouble Shooting - Haier HLP21N Service Manual

Service Manual
Model No: HLP21N
Chapt 6 MAINTENANCE SERVICE AND TROUBLE SHOOTING
6-1.Trouble alarm and solve method
Phenomenon
In wash/rinse/spin, the machine
stops (The "wash" "rinse"
"spin" indicator flash quickly)
The draining does not work, or
the speed of draining is too
slow (the indicators of "rinse"
"spin" flash)
The safety switch acts. The
spinning can not work (the
indicators of "wash" "rinse"
flash quickly)
The program pauses after
about 8 minutes of water inlet
(the indicators of "wash" "spin"
flash quickly)
The machine does not act.
There's abnormal sound inside
the machine.
The water faucet leaks.
Reason
The top lid is not closed.
Is the drain hose blocked
by foreign material?
Are the laundries put
slantingly
Is the machine slanting?
The water faucet is not
open.
The water inlet valve is
blocked.
The water pressure is too
low and the current is too
small.
Is there power failure?
Is the power plug loose?
Is the machine slanting?
Are the laundries slanting in
spinning?
Is the jointer screw of the
water inlet hose is loose or
twisted awry?
-17-
Issue
Rev.
How to solve
Close the top lid.
Clean the foreign material.
Open and close the top lid once.
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
Open the water faucet. Push
the "Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
Use it when the power is on.
Insert the power plug tightly.
Level the machine properly.
Re-order the laundries.
Fasten the jointer screw
properly.