Test Program(Test Without Water) - Haier HLP21N Service Manual

Service Manual
Model No: HLP21N

6-2.Test program(test without water)

Push and hold the "CYCLE" and "start/pause" buttons, then
power switch to enter Test A program. Push the "CYCLE
and Test C programs.
Test name
The buzzer rings intermittently six
times (0.4s connected, 0.8s shutoff).
Test A The program indicator flashes six
times. The power is switched off
automatically after finishing.
It will perform 2 minutes washing
even without water (during running,
you can change the current
Test B selection)Remarks: the water level
switch is invalid. The power is
switched off automatically after
finishing.
2 minutes spinningWhen it detects
abnormal conditions such as
imbalance spinning, or the top lid is
Test C open, it will alarm. Open the top lid
then close it to resume normal
operation. The power is switched off
automatically after finishing.
Remarks:the indicators in the list are (in turn): quick, wash, rinse, spin.
indicator off
Test content
indicator on
-18-
" to select Test B
Selection indicator
Display before
running
indicator flash
Issue
Rev.
push down the
Display during
running
When in alarm