Using The Timers; Setting The Clock - JVC CA-VSDT2000 Instructions Manual

Using the Timers

1 2 3
4
5 6
8 9
7
10
+ 10
BASS
SET
MD/AUX
FM/AM DISPLAY DIMMER
CLOCK OPEN/
COLOR /TIMER CLOSE
CLOCK
/TIMER
RM-SVSDT2000J REMOTE CONTROL
* When the System is in use, the display shows other items as well.
The timers let you control listening functions automatically.

Setting the Clock

(Using the Remote Control)
• When you plug the AC power cord into the wall outlet,
the time indication "AM 12:00" blinks on the display.
• The clock must be correctly set for the timers to work.
Press the % button.
1
CLOCK
/TIMER
2
Press the CLOCK/TIMER button on the
Remote Control.
The hour digit of the time indication rapidly blinks on
the display.
Press the ¢ or 4 button on the
3
Remote Control to set the hour.
Pressing the ¢ button moves the time forwards and
pressing the 4 button moves it backwards. Hold
down the button to move the time rapidly.
STANDBY/ON
PLAY MODE
REPEAT
FM MODE
TREBLE
SET
CANCEL
SLEEP
SLEEP
VOLUME
For simplicity, we show here only the items described in this section.
CLOCK
/TIMER
ON time, OFF time, Source, Volume
SLEEP indicator
4
Press the SET button.
The minute digits of the time indication rapidly blink on
the display.
Press the ¢ or 4 button to set the
5
minute.
6
Press the SET button.
The selected time is set and the seconds start counting
from 0.
CAUTION:
• If there is a power failure, the clock loses its
setting after about 20 minutes. "AM 12:00"
blinks on the display and the clock must be
reset.
• The clock may gain or lose one to two minutes per month.
• The or button operates same as the
button does.
Timer indicator
SLEEP
¢ 4
or
22