Attaching The Spacers; Connecting The Powered Subwoofer (Sp-Pw2000); Connecting External Equipment - JVC CA-VSDT2000 Instructions Manual

Getting Started

Attaching the Spacers

Attach the supplied spacers to the bottom of the powered subwoofer (SP-PW2000) to protect the cabinet, prevent slipping,
and absorb the cabinet vibration. Peel off the backing from a spacer and attach it.

Connecting the Powered Subwoofer (SP-PW2000)

Connect a signal cord (supplied) between the System's SUBWOOFER terminal and the LEFT/MONO INPUT terminal of the
Powered Subwoofer.
WOOFER

Connecting External Equipment

Connect signal cords (not supplied) between the System's MD/AUX-OUT/IN terminals and the output/input terminals of the
external MD recorder, tape deck, etc.
You can then listen to the external source through the System or record the System's CD player or tuner to the external unit.
MD recorder or tape deck
(not supplied)
7
Spacer
(supplied)
Signal cord (supplied)
SUB
Signal cord (not supplied)
Pin-plug x 2
Signal cord (not supplied)
Pin-plug x 2
Bottom of the powered subwoofer
Powered Subwoofer
Stereo mini-plug
OUT
Stereo mini-plug
ANTENNA
FM
(75 )
COAXIAL
AM
LOOP
CD DIGITAL
OUT
MD/AUX
IN
AM
EXT