Toyota Land Cruiser 1996 Owner's Manual page 99

With the button pressed in, the air condi-
tioning turns on. Pressing the button once
again will turn the air conditioning off.
(b) Heating
1. Place the temperature control lever
anywhere except the LOW position.
When dehumidified heating is desired,
place the lever between the HIGH and
middle positions.
If cooler air is desired at face level for bi-
level operation, place the lever around the
middle.
2. Press in the air intake control button to
select the OUTSIDE AIR mode.
If quick circulation of heated air is desired,
press in the air intake control button to se-
lect the RECIRCULATED AIR mode.
For normal use, it is best to keep the air in-
take control button for outside air. If recir-
culated air is used during heating, the win-
dows will fog up more easily.
3. Press in the FLOOR button of the air
flow control buttons.
If cooler air is desired at face level for bi-
level operation, press in the BI-LEVEL
button.
If the windshield fogs up easily, press in
the FLOOR/WINDSHIELD button.
For detailed information on air flow control
including other settings, see "(f) Air flow
selection".
WWW.MANUALS.WS
4. Press in any fan speed control button
except the "OFF" button.
5. Leave the air conditioning on-off but-
ton in the OFF position.
If dehumidified heating is desired, press in
the air conditioning on-off button.
(c) Cooling
1. Place the temperature control lever
anywhere between the middle and LOW
positions.
If warmer air is desired at floor level for bi-
level operation, place the lever around the
middle.
2. Press in the air intake control button to
select the OUTSIDE AIR mode.
If quick circulation of cooled air is desired,
press in the air intake control button to se-
lect the RECIRCULATED AIR mode.
For normal use, it is best to keep the air in-
take control button for outside air.
3. Press in the FACE button of the air flow
control buttons.
If warmer air is desired at floor level for bi-
level operation, press in the BI-LEVEL
button.
For detailed information on air flow control
including other settings, see "(f) Air flow
selection".
WWW.MANUALS.WS
4. Press in any fan speed control button
except the "OFF" button.
5. Press in the air conditioning on-off but-
ton.
(d) Ventilation
1. Place the temperature control lever at
the LOW position.
2. Press in the air intake control button to
select the OUTSIDE AIR mode.
3. Press in the FACE button of the air flow
control buttons.
For detailed information on air flow control
including other settings, see "(f) Air flow
selection".
4. Press in any fan speed control button
except the "OFF" button.
5. Leave the air conditioning on-off but-
ton in the OFF position.
(e) Windshield defogging and defrost-
ing
To remove interior fog on the windshield;
1. Place the temperature control lever at
any position.
2. Press in the air intake control button to
select the OUTSIDE AIR mode.
3. Press in the WINDSHIELD button of
the air flow control buttons.
For detailed information on air flow con-
trol, see "(f) Air flow selection".
97