Toyota Land Cruiser 1996 Owner's Manual page 92

This function does not work properly un-
less the blank portions on the tape have 3
seconds or more between one program
and another.
"SKIP" button: Use for automatic skip-
ping of blank portions between programs.
Push the "SKIP" button. "SKIP" appears
on the display. The player will automati-
cally skip any blank portions of 15 sec-
onds or more and play the next program,
even if it is on the other side. To cancel it,
push the button once again.
"SCAN" button: Use for program-to-
program scanning.
Push the "SCAN" button. With "SCAN" on
the display, each program will be played
for 12 seconds and scan to the next. To
continue listening to the program of your
choice, simply push the "SCAN" button
once again.
The player will automatically reverse di-
rections at the end of the tape and keep
scanning.
"R M" button (radio monitor system):
Use for automatic station reception.
90
WWW.MANUALS.WS
Push the "R M" button. "R M" appears on
the display. In this mode, if you push the
REWIND or FAST FORWARD button
when listening to the tape, the system will
change the radio mode and automatically
receive the last station which was set. At
the time, the received station condition
appears on the display.
The system will be cancelled out when the
power source is severed (battery discon-
nected, burnt fuse, etc.)
(i) Listening to the compact Disc
This Compact DIsc player does not need
to use an adaptor for 8 cm (3.2 in.) Discs.
Do not use an adaptor when listening to 8
cm (3.2 in.) Discs, which cause tracking
errors or interfere with Disc ejection.
1. Put the Compact Disc into the slot, with
the label side up and lightly push it in. The
Disc player will grab the Disc and slide it
into place to play it from the track 1 pro-
gram. As this is done, the "DISC" light will
come on. The track number will appear on
the display.
If the Compact Disc is already in the slot,
push the "CD" button.
WWW.MANUALS.WS
The Compact Disc player can also be
turned on by pushing the "PWR VOL"
knob if the Compact Disc player was play-
ing when the system was turned off by
pushing the knob.
If the radio or cassette tape player is on
when playing the Disc, it will automatically
turn off.
If the Disc is inserted with the label side
down, the Disc will automatically be
ejected.
2. Turn the "PWR VOL" knob to adjust the
volume.
3. Select your program. (See "(j) Select-
ing a program".)
When the end of the Disc is reached, the
player starts playing the track 1 program
again.
4. Adjust the tone and sound balance.
(See "(d) Adjusting the tone" and "(e) Ad-
justing the sound balance".)
5. Push the EJECT button to eject the
Disc. As this is done, the Compact Disc
player will turn off. If the radio or cassette
tape player was on when the Disc was in-
serted, it will automatically turn on again.
6. Push the "PWR VOL" knob to turn the
Compact Disc player off.