Table of Contents
Advertisement
If cooler air is desired at face level for bi-
level operation, place the lever around the
middle.
2. Press in the air intake control button to
select the OUTSIDE AIR mode.
If quick circulation of heated air is desired,
press in the air intake control button to se-
lect the RECIRCULATED AIR mode.
For normal use, it is best to keep the air in-
take control button for outside air. If recir-
culated air is used during heating, the win-
dows will fog up more easily.
3. Press in the FLOOR button of the air
flow control buttons.
If cooler air is desired at face level for bi-
level operation, press in the BI-LEVEL
button.
If the windshield fogs up easily, press in
the FLOOR/WINDSHIELD button.
For detailed information on air flow control
including other settings, see "(e) Air flow
selection".
4. Press in any fan speed control button
except the "OFF" button.
(c) Ventilation
1. Place the temperature control lever at
the NO HEAT position.
2. Press in the air intake control button to
select the OUTSIDE AIR mode.
WWW.MANUALS.WS
3. Press in the FACE button of the air flow
control buttons.
For detailed information on air flow control
including other settings, see "(e) Air flow
selection".
4. Press in any fan speed control button
except the "OFF" button.
(d) Windshield defogging and defrost-
ing
1. Place the temperature control lever at
at the FULL HEATING position.
2. Press in the air intake control button to
select the OUTSIDE AIR mode.
3. Press in the WINDSHIELD button of
the air flow control buttons.
For detailed information on air flow con-
trol, see "(e) Air flow selection".
4. Press in the "HI" button of the fan
speed control buttons.
(e) Air flow selection
FACE button—This button directs the air
flow to face level.
BI-LEVEL button—This button directs
the air flow to face level and the floor. Ex-
cept in ventilation, the air to the floor is
slightly warmer than that to face level.
FLOOR button—This button directs the
air flow mostly to the floor and front side
windows.
WWW.MANUALS.WS
FLOOR/WINDSHIELD button—This but-
ton directs the air flow to the windshield as
well as the floor.
WINDSHIELD button—This button di-
rects the air flow to the windshield and
front side windows.
(f) Operating tips
D Be sure the air inlet grilles in front of the
windshield are not blocked by leaves
or other obstructions.
D If air flow control is not satisfactory,
check the side vents. (See "Side
vents" after "Boost ventilator con-
trols".)
D When driving on dusty roads, close all
windows. If dust thrown up by the ve-
hicle is still drawn into the vehicle after
closing the windows, it is recom-
mended that the air intake control but-
ton be set in the OUTSIDE AIR mode
and any fan speed control button ex-
cept the "OFF" button be pressed in.
D If following another vehicle on a dusty
road, or driving in windy and dusty con-
ditions, it is recommended that the air
intake control button be temporarily
set to select the RECIRCULATED AIR
mode, which will close off the outside
passage and prevent outside air and
dust from entering the vehicle interior.
101
Hide quick links:
Advertisement
Table of Contents
