Reinstalling Wheel Ornament; After Changing Wheels; If Your Vehicle Needs To Be Towed - Toyota Land Cruiser 1996 Owner's Manual

—Reinstalling wheel ornament

10. Reinstall the wheel ornament.
Put the wheel ornament into position and
then tap it firmly with the side or heel of
your hand to snap it into place.
CAUTION
!
Take due care in handling the orna-
ment to avoid unexpected personal
injury.
140
WWW.MANUALS.WS

—After changing wheels

11. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specification
designated in Part 8. If the pressure is
lower, drive slowly to the nearest service
station and fill to the correct pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restow all the tools, jack and flat
tire securely.
As soon as possible after changing
wheels, tighten the wheel nuts to the
torque specified in Part 8 with a torque
wrench, and have a technician repair the
flat tire.
!
Before driving, make sure all the
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal
injury during a collision or sudden
braking.
WWW.MANUALS.WS
CAUTION
If your vehicle needs to
be towed—