Reinstalling Wheel Ornament - Toyota 1997 Tercel Owner's Manual

—Lowering your vehicle
9. Lower the vehicle completely and
tighten the wheel nuts.
Turn the jack handle counterclockwise to
lower the vehicle.
Use only the wheel nut wrench and turn it
clockwise to tighten the nuts. Do not use
other tools or any additional leverage oth-
er than your hands, such as a hammer,
pipe or your foot. Make sure the wrench is
securely engaged over the nut.
Tighten each nut a little a time in the order
shown. Repeat the process until all the
nuts are tight.
130
WWW.MANUALS.WS
CAUTION
!
When lowering the vehicle, make
sure all portions of your body and
all other persons around will not be
injured as the vehicle is lowered to
the ground.
WWW.MANUALS.WS

—Reinstalling wheel ornament

10. Reinstall the wheel ornament.
Align the cutout of the wheel ornament
with the valve stem as shown. Then tap it
firmly with the side or heel of your hand to
snap it into place.
CAUTION
!
Take due care in handling the
ornament to avoid
personal injury.
unexpected