Canon MX860 series Manual page 664

Canon IJ Network Scan Utility Menu and Setting Screen
use.
You can select up to three scanners.
Note
If the scanner you want to use is not displayed, check the following conditions and click OK to close
the dialog box, then reopen it and select the scanner.
- The MP Drivers are installed
- Network setup is completed after installing the MP Drivers
- Network communication between the product and computer is enabled
If the scanner is still not displayed, see Help.
You do not need to use this software when scanning via USB or from a computer. See "
the Canon IJ Network Tool/Canon IJ Network Scan Utility
a computer even if it is not deleted.
" to delete it. You can scan via USB or from
Pagina 664 din 1009 pagini
Uninstalling
Page top