Canon MX860 series Manual page 635

Input Settings
Important
The Orientation dialog box can only be opened when Select Source is Document (ADF Simplex)
or Document (ADF Duplex).
Binding Location cannot be specified when Select Source is Document (ADF Simplex).
Color Mode
Select how to scan the document.
Color
Select this mode to scan color documents or to create color images. This mode renders the
image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).
Grayscale
Select this mode to scan black and white photos, or to create black and white images. This mode
renders the image in 256 levels (8 bit) of black and white.
Black and White
Select this mode to scan photos and other documents in black and white. This mode renders the
image in black and white. The contrast in the image is divided at certain levels (threshold level)
into black and white and is rendered in two colors. The threshold level can be set with
(Threshold).
Input Size
The Paper Size is displayed before preview. After preview, the cropping frame size is displayed.
You can adjust the cropping frame (scan area) size by entering the values into
(Height).
Click (Keep Aspect Ratio) and change it to
specify the cropping frame size.
Important
Input size settings are available only when Output Size in Output Settings is Flexible. If you select
a size other than Flexible, a cropping frame calculated from Output Size and Output Resolution is
displayed, and its aspect ratio is fixed.
Note
The values you can enter will be within the range of the selected document size. The minimum
size is 96 pixels x 96 pixels when Output Resolution is 600 dpi and enlarge/reduce is 100%.
When Auto Crop is performed, the aspect ratio will not be maintained since the size will be
prioritized.
Adjusting Cropping Frames
See "
(Locked) to maintain the aspect ratio when you
" for details on cropping frames.
Pagina 635 din 1009 pagini
(Width) and
Page top