1
coin-cell battery
2
5. Install the replacement battery:
a. Insert the battery at a 30-degree angle under the release latch with the positive side up, and then push the battery into place.
b. Connect the battery cable to the connector on the system board.
6. Replace the keyboard.
7. Replace the hinge cover.
Optical Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1. Follow the procedures in
Before You
2. Turn the computer over.
3. Remove the optical-drive security screw.
4. Insert a scribe into the notch and push it to the side to release the drive from the bay.
1
notch
2
optical-drive security screw
5. Slide the drive out of the bay.
To reinstall the optical drive, slide the drive into the drive bay and snap it into place. Then replace the optical-drive security screw.
Internal Card With Bluetooth® Wireless Technology
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
release latch
3
battery cable connector
Begin.
3
optical drive