Component Video And S/Pdif Digital Audio - Dell XPS M1710 Owner's Manual

1 S-video TV-out connector
1 component video adapter
1. Turn off the computer and the TV and/or audio device that you want to connect.
2. Connect the component video adapter to the S-video TV-out connector on your computer.
3. Plug all three ends of the component video cable into the component video-output connectors on the component video adapter. Make sure that the red,
green, and blue colors of the cable match the corresponding adapter ports.
1 component video adapter
4. Plug all three connectors from the other end of the component video cable into the component video- input connectors on the TV. Make sure that the
red, green, and blue colors of the cable match the colors of the TV input connectors.
5. Plug the single-connector end of the audio cable into the headphone connector on the computer.
6. Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on your TV or audio device.
7. Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.
8. See Enabling the Display Settings for a TV in Microsoft® Windows® XP

Component Video and S/PDIF Digital Audio

2 component video adapter
2 component video cable 3
2 component video cable
standard audio cable
to ensure that the computer recognizes and works properly with the TV.