Selecting The Sound Modes - JVC CA-MXSK1 Instructions Manual

Selecting the Sound Modes

You can select one of the 3 SEA (Sound Effect Amplifier)
modes. This function only affects the playback sound, but
does not affect your recording.
On the unit:
Press the sound mode button you want to get
the effect of ROCK, POP, or CINEMA. The
selected Sound Mode name "ROCK", "POP",
or "CINEMA" appears on the display. Also,
the Sound Mode indicator that corresponds to
the selected sound mode blinks.
The SOUND MODE indicator
also lights up on the display.
S.MODE
To cancel the effect, press the selected mode button again.
On the remote control:
To select the sound modes, press SOUND
MODE until the sound mode you want appears
on the display.
• The sound modes change as follows:
POP
ROCK
OFF (Cancelled)
SEA (Sound Effect Amplifier) modes:
ROCK: Boosts low and high frequency. Good for
acoustic music.
POP: Good for vocal music.
CINEMA: Good for special effect sound from movie.
OFF: The sound mode is cancelled. The SOUND
MODE bar indicator goes off.
Select any Sound Modes will turn off Sound Turbo.
SOUND
MODE
CINEMA
– 11 –