Adjusting The Volume; Reinforcing The Bass Sound; Selecting The Sound Modes - JVC PC-X290 Instructions Manual

Cd portable component system
Hide thumbs Also See for PC-X290:
Table of Contents

Advertisement

Adjusting the Volume

You can adjust the volume level only while the unit is turned
on.
Turn the VOLUME +/– clockwise to
increase the volume or counterclockwise
to decrease it.
• The volume level can be adjusted in 31
steps (00 VOL to 30 VOL).
When using the remote control, press VOLUME + to increase
the volume or press VOLUME – to decrease it.
To turn off the sound temporarily
On the remote control ONLY:
Press MUTING.
The sounds is turned off and the MUTING indicator appears
on the display.
To restore the sound, press MUTING again.
The MUTING indicator goes off.
• Adjusting the volume level also cancels the muting.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.

Reinforcing the Bass Sound

The Hyper Bass Sound function provided for this unit can
enhance the bass sound while listening to any source at low
volume.
-
VOLUME
• You can use this function only for playback.
+
To turn on the function, press and hold HBS/
PRESET EQ for more than 1 second so that
the HBS indicator appears on the display.
To turn off the function, press and hold the button for more
than 1 second again so that the HBS indicator goes off from
the display.

Selecting the Sound Modes

You can select one of the 5 preset sound modes.
SEA (Sound Effect Amplifier) modes:
CLASSIC: Good for classical music.
ROCK:
POP:
JAZZ:
FLAT:
• This function only affects the playback sound, but does not
affect your recording.
To select the sound modes, press HBS/
PRESET EQ repeatedly until the indicator for
the sound mode you want appears on the
display.
• Each time you press the button, the sound
modes change as follows:
FLAT
– 10 –
HBS
Boosts low and high frequency. Good for
acoustic music.
Good for vocal music.
Good for jazz music.
Normal sound.
CLASSIC
ROCK
JAZZ
POP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc-x290ebCa-pcx290Sp-pcx290

Table of Contents