Toyota 2007 Highlander User Manual page 350

NOTICE
Use only a cable or chain specifically
intended for use in towing vehicles.
Securely fasten the cable or chain to
the towing eyelet provided.
Before towing, release the parking brake
and put the transmission in "N". The key
must be in "ACC" (engine off) or "ON"
(engine running).
CAUTION
If the engine is not running, the pow-
er assist for the brakes and steering
will not work so steering and braking
will be much harder than usual.
350
'07 HIGHLANDER_U (L/O 0608)
—Installing front towing eyelet
1. Remove the front towing eyelet cover
on the front bumper by pushing the
outside of the cover.
2. Use the front towing eyelet in the lug-
gage compartment. Secure it to the
hole on the bumper by turning clock-
wise. (For the towing eyelet location,
see "—Required tools and spare tire"
on page 336 in this Section.)
2007 HIGHLANDER from July '06 Prod. (OM48682U)