Toyota 2007 Highlander User Manual page 165

If you need acceleration—for example,
when passing—depress the accelerator
pedal enough for the vehicle to exceed
the set speed. When you release it, the
vehicle will return to the speed set prior
to the acceleration.
CANCELLING THE CRUISE CONTROL
The cruise control may be temporarily
cancelled by the driver or by the system
itself under certain circumstances. Tempo-
rary cancellation allows the set cruising
speed to remain in memory.
The cruise control can be temporarily can-
celled by doing the following:
A
Pulling the lever in the "CANCEL" di-
rection and releasing it
A
Depressing the brake pedal
Under certain circumstances, the cruise
control is temporarily cancelled:
A
When vehicle speed falls below 40
km/h (25 mph)
A
When vehicle stability control is acti-
vated
When vehicle speed drops 16 km/h (10
mph) below the set speed, the cruise con-
trol is cancelled and the set speed is
erased from memory.
'07 HIGHLANDER_U (L/O 0608)
The "CRUISE" indicator light remains on
to indicate that the system is still in op-
eration.
To turn the cruise control off, press the
"ON−OFF" button. Make sure
"CRUISE" indicator light is off.
If the cruise control automatically cancels
out other than for the above cases, have
your vehicle checked by your Toyota deal-
er at the earliest opportunity.
RESUMING THE CRUISE CONTROL
If the cruise control is temporarily can-
celled, the cruising speed can be resumed
by pushing the lever up in the "+ RES"
direction.
Vehicle speed must be above 40 km/h (25
mph).
RESETTING TO A FASTER SPEED
Push the lever up in the "+ RES" direction
and hold it. Release the lever when the
desired speed is attained. While the lever
is held up, the vehicle will gradually gain
speed.
However, a faster way to reset is to ac-
celerate the vehicle and then push the
lever down in the "− SET" direction.
RESETTING TO A SLOWER SPEED
Push the lever down in the "− SET" direc-
tion and hold it. Release the lever when
the desired speed is attained. While the
the lever is held down, the vehicle speed will
gradually decrease.
However, a faster way to reset is to de-
press the brake pedal and then push the
lever down in the "− SET" direction.
Even if you turn off the overdrive switch
with the cruise control on, engine braking
will not be applied because the cruise
control is not cancelled. To decrease the
vehicle speed, reset to a slower speed
with the cruise control lever or depress
the brake pedal. If you use the brake
pedal, cruise control is cancelled.
2007 HIGHLANDER from July '06 Prod. (OM48682U)
165