Toyota 2007 Highlander User Manual page 105

3. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 89 in this Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
'07 HIGHLANDER_U (L/O 0608)
4. Replace the head restraint and lift it
up to the uppermost lock position.
Be sure to close the cover when the an-
chor bracket is not in use.
—Installation with child
restraint lower anchorages
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications
installed in the second seat.
The anchorages are installed in the seat
cushion of both outside second seats.
Child restraint systems complying with the
FMVSS213 or CMVSS213
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
2007 HIGHLANDER from July '06 Prod. (OM48682U)
are
specification
105