Toyota 2007 Highlander User Manual page 345

Tighten each nut a little at a time in
the order shown. Repeat the process
until all the nuts are tight.
CAUTION
D When lowering the vehicle,
make sure all portions of your
body and all other persons
around will not be injured as
the vehicle is lowered to the
ground.
D Have the wheel nuts tightened
with torque wrench to 103 N·m
(10.5 kgf·m, 76 ft·lbf), as soon
as possible after changing
wheels. Otherwise, the nuts
may loosen and the wheels
may fall off, which could cause
a serious accident.
'07 HIGHLANDER_U (L/O 0608)
—Reinstalling wheel ornament
Type A
Type B
10.Reinstall the wheel ornament.
1. Put the wheel ornament into posi-
tion.
2. Then tap it firmly with the side or
heel of your hand to snap it into
place.
CAUTION
D Take due care in handling the
ornament to avoid unexpected
personal injury.
D Do not attach a heavily dam-
aged plastic wheel ornament.
It may fly off the wheel and
cause accidents while the ve-
hicle is moving.
2007 HIGHLANDER from July '06 Prod. (OM48682U)
345