Decals - Jacobsen 67862 Parts & Maintenance Manual

HR-4600

1.1 Decals

OPERATION
READ MANUAL BEFOR OPERATING.
REPLACEMENT MANUAL AVAILABLE FROM:
TEXTRON TURF CARE AND SPECIALTY
PRODUCTS, RACINE WI.
To Start To Stop/Park
1. Parking Brake.............On
1. Traction Pedal......Neutral
2. Traction Pedal......Neutral
2. Mower Switch..............Off
3. Mower Switch.............Off
3. Parking Brake.............On
4. Throttle......................Half
4. Throttle.....................Slow
5. Ignition........................On
5. Ignition........................Off
5. Glow Plug Light.........Off
6. Remove Key
7. Ignition.....................Start
To Drive/Transport To Mow
1. Follow "To Start" 1. Follow "To Start"
Instructions. Instructions.
2. Mower Switch.............Off 2. Throttle......................Fast
3. Cutting Units..........Raise 3. Mower Switch...........Mow
4. Parking Brake.............Off 4. Parking Brake.............Off
5. Throttle......................Fast 5. Cutting Units.........Lower
6. Slowly depress 6. Slowly depress
traction pedal traction pedal
LF-3400: Engine Power: 23.0 kW @ 3000 rpm.
Vehicle Mass: 1160 kg (2WD), 1230 kg (4WD)
LF-3800: Engine Power: 26.5 kW @ 3000 rpm.
Vehicle Mass: 1250 kg (2WD), 1320 kg (4WD)
HR-4600: Engine Power: 33.0 kW @ 3000 rpm.
Vehicle Mass: 1250 kg
3
2
10
7
5
8
6
28
STARTING THE TRACTOR CONTROLLER FUNCTIONS BY LAMP NUMBER
LAMP SIGNAL CIRCUIT
THE FOLLOWING LAMPS MUST BE ON WHEN THE
3....INPUT...PROGRAM ACTIVE (INDICATES CONTROLLER
IGNITION KEY IS IN THE "RUN" POSITION:
HAS POWER)
LAMP 4....INPUT...KEY SWITCH-"START" POST
5....INPUT...NEUTRAL START SWITCH
3..PROGRAM ACTIVE (INDICATES CONTROLLER
6....INPUT...BRAKE SWITCH
HAS POWER)
7....INPUT...SEAT SWITCH
5.....NEUTRAL START SWITCH (TRANSPORT PEDAL)
9....INPUT...CRUISE CONTROL SWITCH-OFF-PIN 1
6.....BRAKE SWITCH (PEDAL MUST BE ENGAGED)
10...INPUT...CRUISE CONTROL SWITCH-ON-PIN 6
31....GLOW PLUG RELAY AND INDICATOR-
11...INPUT...HYDRAULIC OIL LEVEL FLOAT SWITCH
(DURATION THE LAMP IS LIT DEPENDS ON
12...INPUT...HYDRAULIC OIL LEVEL ALARM SWITCH-PIN 3
ENGINE TEMPERATURE)
13...INPUT...ENGINE OIL PRESSURE SWITCH
THE FOLLOWING LAMPS MUST BE OFF WHEN THE
16...INPUT...LIFT LIMIT SWITCH-LEFT WING
IGNITION KEY IS IN THE "RUN" POSITION:
19...INPUT...LIFT LIMIT SWITCH-RIGHT WING
4.....KEY SWITCH-"START" POST
20...INPUT...JOYSTICK-LEFT-PIN 4
25...REEL SWITCH-FORWARD DIRECTION-PIN 1
21...INPUT...JOYSTICK-RIGHT-PIN 5
33...START RELAY AND INDICATOR
22...INPUT...JOYSTICK-LOWER-PIN 3
37...REEL SWITCH-LEFT WING ACTIVE SIGNAL
23...INPUT...JOYSTICK-RAISE-PIN 2
38...REEL SWITCH-CENTER ACTIVE SIGNAL-PIN 5
25...INPUT...DECK SWITCH-FORWARD DIRECTION-PIN 1
39...REEL SWITCH-RIGHT WING ACTIVE SIGNAL
31...OUTPUT...GLOW PLUG RELAY AND INDICATOR
ALL OTHER LAMPS DO NOT AFFECT 32...OUTPUT...LIGHT TEST
THE STARTING OF THIS MACHINE. 33...OUTPUT...START RELAY AND INDICATOR
34...OUTPUT...FUEL HOLD COIL
"START" 35...OUTPUT...WARNING HORN
POSITION
"RUN" 36...OUTPUT...HYDRAULIC OIL LEVEL LIGHT
POSITION 37...OUTPUT...DECK SWITCH-LEFT WING ACTIVE SIGNAL-PIN
38...OUTPUT...DECK SWITCH-CENTER ACTIVE SIGNAL-PIN 5
IGNITION SWITCH POSITIONS 39...OUTPUT...DECK SWITCH-RIGHT WING ACTIVE SIGNAL-PIN 5
40...OUTPUT...CRUISE CONTROL COIL/LIGHT(OPTION)
"OFF" LOCATED ON THE
INSTRUMENT PANEL 41...OUTPUT...VALVE-LIFT PRESSURE
POSITION
42...OUTPUT...VALVE-RAISE-LEFT WING
43...OUTPUT...VALVE-RAISE-CENTER
44...OUTPUT...VALVE-RAISE-RIGHT WING
LAMP ON = CIRCUIT IS ACTIVE
45...OUTPUT...VALVE-LOWER-LEFT WING
LAMP OFF = CIRCUIT IS INACTIVE
46...OUTPUT...VALVE-LOWER-CENTER
47...OUTPUT...VALVE-LOWER-RIGHT WING
LAMPS NOT USED: 1,2,8,14,15,17,18,24,26,27,28,29,30,48
SEE OPERATOR'S MANUAL FOR MORE DETAILED INSTRUCTIONS.
1
13
12
11
3
15
16
17 / 18
WARNING

. Read operators manual before
operating machine.
2. Keep shields in place and
hardware securely
fastened.
3. Before you clean, adjust
or repair this equiptment,
disengage all drives,
engage parking brake
and stop engine.
4. Keep hands, feet and
clothing away from
moving parts.
5. Never carry passengers.
6. Keep bystanders away.
7. Do not use on slopes
greater than 18 .
2
9
HR 4600 TURBO 4WD
19
Serial No. All
13
1
4
14