Maintenance And Storage; Layout - Qualcast 56cm Self Propelled Lawnmower Operating Instructions Manual

Maintenance and storage

1. Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
2. Never store the mower (with petrol in the
tank) inside a building in which petrol
fumes could come into contact with open
flames or sparks.
3. Allow the motor to cool before you put the
lawn mower in an enclosed area.
4. In order to avoid fire hazards, keep the engine,
exhaust and the area around the fuel tank free
from grass, leaves and leaking grease (oil).
5. Routinely check the collection bag for signs of
wear and impaired functionality.
6. For your own safety, replace worn or damaged
parts without delay.
7. If the fuel tank should require emptying this
should only be done in the open air where it is
advisable to use a petrol suction pump
(available from Einhell UK - call 0151 649 1500).
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock,
fire and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the symbols on the machine
(Fig. 11):
1) Read the operating instructions
2) Important! Danger from catapulted parts.
Keep a safe distance.
3) Important! Switch off the engine and pull the
spark plug boot before doing any maintenance,
repair, cleaning or adjustment work.
4) Fill with oil and fuel before starting the mower.
5) Caution! Wear ear protection and
safety goggles.
6) Engine start/stop lever (I=Engine on; 0=Engine off)
7) Drive lever (clutch lever)
Helpline No. UK 0151 649 1500 / IRE 189 094 6244
2. Layout (Fig. 1+2)
1. Engine start/stop lever – engine brake
2. Top push bar
3. Handle
4. Starter cable
5. Lower push bar
6. Grass collection bag
7. Ejector flap
8. Cutting height adjustment
9. Tank filler cap
10. Oil-filler neck
11. Oil drainage screw
12. 2 x cable ties
13. Spark plug wrench
14. 2 x square head screws for top push bar
15. 2 lever cam screws for upper push bar
with high speed clamping function
16. Side ejector cover
17. 4 x star knobs for push bar
18. Drive lever (clutch lever)
19. Drive wheel (left and right)
20. Side ejector adaptor
21. Mulching adaptor
22. Pull start handle hook
09