Setting The Clock - JVC 0303MWMMDWJEM Instructions Manual

Setting the Clock

You can set the clock when the unit is either turned on or in
standby mode.
On the remote control ONLY:
1 2
4 5
7 8
10 0
PLAY MODE
ON SCREEN ZOOM
AUDIO SUB TITLE
TOP MENU
SET
SET
DVD
TAPE
SELECT
STROBE
PREV. NEXT
GROUP SKIP
KEY
DIGITAL
CONTROL
ECHO
1
Press CLOCK/TIMER.
"0:00" appears in the main display with the hour digit
flashing.
2
Press ¢ or 4 repeatedly to adjust the hour.
• When you press and hold the button, the hour digit
changes continuously.
• You can also use the number buttons.
– To adjust the hour to 5, press 5.
– To adjust the hour to 12, press +10, then 2.
– To adjust the hour to 20, press +10, then 10 (or
press +10 twice, then 0).
3
Press SET to set the hour.
The minute digit starts flashing.
• If you want to change the hour again, press
CANCEL.
The hour digit starts flashing again.
17
STANDBY/ON
3
DISPLAY
DISPLAY
6
CLOCK/TIMER
CLOCK/TIMER
9
A.P.
SLEEP
OFF
+10
REV. MODE DVD
COLOR
DIGEST LEVEL
DIMMER
ANGLE
MENU CHOICE
ENTER
CANCEL
CANCEL
FM/AM AUX/MD
PREV. NEXT
RETURN
GROUP SKIP
– +
SLOW SLOW
3D PHONIC AHB PRO
4
Press ¢ or 4 repeatedly to adjust the minute.
• When you press and hold the button, the minute digit
changes continuously.
• You can also use the number buttons.
– To adjust the minute to 5, press 5.
– To adjust the minute to 25, press +10, +10, then 5.
– To adjust the minute to 30, press +10, +10, then 10
(or press +10 three times, then 0).
5
Press SET to finish setting the clock.
The built-in clock starts.
To adjust the clock again
Once you have adjusted the clock, you need to press
CLOCK/TIMER repeatedly until the clock setting screen appears
in the main display (the hour digit starts flashing).
When you unplug the AC power cord or if a power
failure occurs
The clock loses its setting and resets to "0:00." If this happens, set
the clock again.
To turn off the clock indication (power save mode)
On the remote control ONLY:
Press DISPLAY while the unit is in standby mode.
"DISPLAY OFF" appears in the main display and the clock
indication goes off.
To turn on the clock indication, press DISPLAY again
while the unit is in standby mode.
"DISPLAY ON" appears in the main display.
To show the clock when the unit is turned on
On the remote control ONLY:
Press DISPLAY.
The clock indication appears in the main display.
To return to the normal display, press DISPLAY again.