Svcd/Vcd/Audio Cd Basic Operations - JVC 0303MWMMDWJEM Instructions Manual

• Current disc information
1
1 / 2 1 / 2
ENGLISH
2
1 : Current disc information
2 : Total number of multi-angle views
3 : Total number of audio languages
4 : Total number of subtitles
• Disc playing information
3 2 1:33:33
TITLE CHAP. TIME
1 2
3
1 : Current title number
2 : Current chapter number
3 : Elapsed playing time of the current title
4 : Transmission rate
To increase the DVD's sound level
The DVD's audio sound is recorded at a lower level than
for other discs such as VCDs or Audio CDs.
If you feel the sound is not strong enough to listen to when
playing back a DVD, you can increase the sound level of
DVD playback in advance.
• Once you adjust this setting, it is effective every time you
play back a DVD.
• This setting does not effect any discs other than DVDs.
• The audio output level through the DVD OPTICAL
DIGITAL OUT terminal does not change if you change
the DVD sound level.
On the remote control ONLY:
To increase the sound level of DVD playback, press DVD
LEVEL while holding down SHIFT.
• Each time you press the buttons, the sound level changes
as follows:
NORMAL
The selected level appears on the display.
V D V D
Ex.: When "MIDDLE" is selected.
• When you purchased this unit, the DVD sound level is
set to "MIDDLE."
1 / 5
ENGLISH
3 4
3.3
BITRATE Mbps
4
MIDDLE HIGH

SVCD/VCD/Audio CD Basic Operations

Available for:
SVCD
SVCD
• To play back a DVD, see page 29.
• To play back an MP3 disc, see page 32.
• While playing a SVCD or VCD with the PBC function,
the playback will stop when a disc menu appears. If a
menu appears while playing a SVCD or VCD with
PBC function, see "Playing Back by Using the Disc
Menu" on page 34.
1
Load a disc.
2
Press DVD #/8 on the main unit (or DVD SELECT 3
on the remote control).
After reading the disc contents, playback starts from
the first track.
• The disc playing information appears on the display.
Current track No.
V C D
Current disc type*
Ex.: When a VCD is played without the PBC function.
* About the indication of current disc type
– "VCD": shows a SVCD or VCD is loaded.
– "CD": shows an Audio CD is loaded.
• While playing a SVCD or VCD with the PBC
function, "PBC" rather than the current track number
appears in the main display and the PBC indicator
lights up. (About the PBC function, see pages 34 and
35.)
PBC indicator
V C D
PBC
Ex.: When a VCD is played with the PBC function.
Continued
Audio CD
VCD VCD Anduio CD
Elapsed playing time
30