Turning On The Power - JVC 0303MWMMDWJEM Instructions Manual

Turning On the Power

When you press one of the source selecting buttons, the
unit automatically turns on (and starts playback if the
source is ready).
On the remote control:
On the main unit:
* Pressing DVD 0 also turns on the unit.
To turn on the unit without playing, press
STANDBY/ON (or
The STANDBY lamp on the main unit goes off.
"HELLO" appears in the main display.
To turn off the unit (on standby), press
STANDBY/ON (or
The STANDBY lamp on the main unit lights up.
"SEE YOU" appears in the main display.
• When you use the Resume function (see page 58),
turning off the power while playing a disc stops playback
and stores the stop point.
By pressing DVD SELECT 3 (or DVD #¥8 on the
main unit), you can turn on the unit and start playback
again from the position where you have stopped—
Resume play. ("RESUME" appears in the main display.)
• A little power is always consumed even while the unit is
in standby mode.
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The settings you have done will be erased.
19
DVD
TAPE FM/AM AUX/MD
SELECT
*
REV.MODE AUX/MD
FM/AM
DVD TAPE
on the main unit).
on the main unit) again.
To turn off the unit automatically (Auto Power Off)
Using the Auto Power Off function, the unit automatically
turns itself off if no sound comes in for more than 3
minutes when the DVD player or "TAPE" is selected as the
source.
If an operation is done during this 3-minute period, Auto
Power Off is canceled temporarily even though no sound
comes in.
• You can also turn off the unit automatically by using the
sleep timer. (See page 64.)
On the remote control ONLY:
To activate Auto Power Off, press A.P.OFF while holding
down SHIFT.
The A.P.off (Auto Power off) indicator lights up on the
display.
• When no sound comes in, the A.P.off indicator starts
flashing on the display. About 20 seconds before the unit
turns itself off, "AUTO POWER OFF" starts flashing in
the main display.
A.P.off indicator
TAPE REC PRGM
V C D V D
PBC RANDOM
To deactivate Auto Power Off, press A.P.OFF while
holding down SHIFT.
The A.P.off indicator goes off.
TONE
3D PHONIC AHB PRO DAILY REC
ALL A - B STEREO MONO SLEEP A.P.off