JVC 0303MWMMDWJEM Instructions Manual page 18

To select the monitor type—Step 2:
You need to select the monitor type to match your TV to
play back DVDs recorded with a height/width ratio of 16:9.
1
Press Cursor 5 repeatedly to move
"LANGUAGE."
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PRESS KEY
2
Press Cursor 3/2 repeatedly to move
"DISPLAY."
The DISPLAY menu appears on the TV.
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
PRESS KEY
3
Press Cursor ∞ to move
TYPE."
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
PRESS KEY
4
Press Cursor 3/2 to select the monitor type.
Select the monitor type according to the guidelines on
the right column.
• If audio equipment is connected to the DVD OPTICAL
DIGITAL OUT terminal:
Go to "To select the output signal type" on the
next page.
• If audio equipment is NOT connected to the DVD OPTICAL
DIGITAL OUT terminal:
The setting is done.
Press CHOICE while holding down SHIFT.
The setting menu goes off.
15
to
ENGLISH
ENGLISH
ENGLISH
ENGLISH
EXIT
to
4:3 LB
MODE 2
ON
EXIT
to "MONITOR
4:3 LB
MODE 2
ON
EXIT
7 Guidelines to select the monitor type
Selectable types: 4:3 LB
• Even if "4:3 PS " is selected, the screen size may
become "4:3 LB " while playing some DVDs.
This depends on how the DVD is programed and
recorded.
• If a disc (or some portions of the disc) is recorded
with video signals of 4:3 aspect ratio, this setting does
not take effect. The pictures are displayed with full
4:3 aspect ratio or with 4:3 Letter Box.
, 16:9 WIDE, 4:3 PS
• 4:3 LB (Letter Box)
Select when viewing on a
TV whose aspect ratio is
4:3.
While viewing a wide
screen picture, the black
bars appear on the top and
the bottom of the screen.
• 16:9 WIDE:
Select when viewing on a
TV whose aspect ratio is
16:9.
• 4:3 PS (Pan Scan) :
Select when viewing on a
TV whose aspect ratio is
4:3.
While viewing a wide
screen picture, the black
bars do not appear;
however, a portion of the
left and right edges of the
picture will not show on the
screen.
: