Recording Other Sources Onto A Tape - JVC 0303MWMMDWJEM Instructions Manual

To record a single track during play
Available for:
SVCD
SVCD
• You can do this operation for SVCD or VCD only
without the PBC function.
On the main unit ONLY:
While playing back a track you want to record, press
REC.
The playback of the track is stopped, and the same track
starts playing from the beginning again. This time, the
cassette deck starts recording the track.
• After the track is recorded, both the DVD player and the
cassette deck stop automatically.
If you do the above operation for a DVD or an MP3
disc
Recording starts from the point where you press the button and
does not stop after the current chapter or track is recorded.
(Playback also continues.)
When you press REC while pausing a track
Recording starts from that point.

Recording Other Sources onto a Tape

You can record from FM or AM broadcasts or the sound
from external equipment connected to the AUX/MD jacks
onto a tape.
• You can use only type I tapes for recording.
• When you want to record onto both sides of a tape, you
can set the reverse mode to do so. Recording
automatically stops after recording in the 2 direction.
Therefore, make sure that the tape direction is 3 when
recording with the reverse mode on.
1
Prepare the source to record.
To record from FM/AM broadcasts:
Press FM/AM to select either "FM" or "AM," then tune
in to the station you want.
• For more detailed tuner operations, see pages 24 to
26.
To record from external equipment:
Press AUX/MD to select "AUX/MD" and prepare the
external equipment.
• Adjust audio input level through the AUX/MD jacks
if necessary. (See page 23.)
• For operation of external equipment, see its manual
also.
VCD VCD Audio CD Anduio CD
2
Put a recordable cassette into the cassette holder.
3
Press REV. MODE to select the reverse mode.
• Each time you press the button, the reverse mode
changes as follows:
Recording on
one side.
* will be shown during recording when you select
.
4
Press REC on the main unit.
Recording starts and the REC indicator starts flashing
on the display.
REC indicator
TAPE REC
Ex.: When recording from an FM broadcast.
• When recording from external equipment, start
playback on external equipment after the
following indication appears in the main display.
REC indicator
TAPE REC
To stop recording, press 7.
Recording on
both sides once.
*
52