Table of Contents
Advertisement
A-FRAME INSTALLATION (Quick Hitch) (Model RX60 & RX72)
1. Attach the A-Frame Bars (2) to the right and left Hitch Lugs (14 & 15) with two 5/8" x 2" bolts (16), 5/8"
washers (17), bushing (18) and 5/8" locknuts (19) Figure Asm-R-0342.
2. Attach the Lift Strap Bars (1) to the Mainframe with two 5/8" bolts (16), 5/8" flatwasher (17), bushing (18)
and 5/8" locknut (19) Figure Asm-R-0341.
3. Attach flex links (3) to A-Frame bars (2) with 5/8" x 3" carriage bolts (7), bushings (8), flatwasher (9) and
nut (10).
4. Insert quick hitch bushing (5) between A-Frame and insert 5/8" x 4-1/2" bolt (4) and 3/4" locknut (6).
5. Insert 5/8" x 2-3/4 bolt (11) through center holes in flex links (3) with bushing (12) through forward holes in
rear braces (1).
6. Insert bolt (13) through 2nd hole from front in rear braces (1) and secure with locknut (10).
7. Insert 5/8" x 2-3/4" bolt (11) through rear holes in flex links (3) through bushing (12) with bushing over or on
top of rear braces (1).
RX60/72/84 10/12
© 2012 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-5
Advertisement
Table of Contents
