Table of Contents
Advertisement
f.
Create new logical units or use ones that already exist:
To create new logical units:
•
Check Create new logical units if it is not checked.
•
In the Logical Unit Capacity field, enter the size of the new
logical units you want to create.
•
In the Number of Logical Units field, enter the number of logical
units to create. Each logical unit that will be created will be the
same size that you specify in this field.
To use logical units that already exist:
•
Under Existing logical units, check each existing logical unit you
want to use. To check them all, click the checkbox to the left of
LUN. (Clicking this checkbox again deselects all existing logical
units.)
g. Click Next to save the settings. A page similar to the one in
24
h. Select the physical port for the host group.
i.
Create new host groups or use ones that already exist:
To create new host groups:
•
Select Create new host groups if it is not checked.
•
In the Host Group No field, enter a host group number from 1 to
127.
•
In the Name field, enter a host group name from 1 to 32
characters.
•
Select a platform and/or middleware setting if appropriate for your
configuration (refer to the Navigator 2 online help).
26
appears.
Figure 1-24: Create or Select Host Group Page
Hitachi AMS 2500 Getting Started Guide
Figure 1-
Hide quick links:
Advertisement
Table of Contents
